Lipoly, Li-Fe battery voltage monitor, balancer

Balancer screen and key position drawing

The balancer /discharger is designed for Li-polymer and Li-fe battery, it can measure

Battery voltage precisely and balance cell voltage in battery pack, or discharging

Battery for long time storage

The balancer function can be executed before /after battery chargerd .It also can be done during battery charging process. It makes sure battery pack keeping in excellent condition.

User could observe all cell voltage in whole battery pack at once .It helps user to find out which cell is abnormal during charging or discharging process.

Due to li-polymer &Li-fe battery are high energy density and high discharge ability storage

Using this equipment, you must be patient to study this instruction to keep from wrong

Operation or setting making battery damaged or other danger.

Balance/Discharge voltage setting mothod:

1. Under standard mode, push mode key to start setting mode.

2. First setting balance the lowest permitted voltage, battery must above the voltage, so it can execute balance function.

3. While discharging the permitted lowest voltage generally be set to battery stored voltage pre-setting is 3.9V (in only fit for general Li-polymer battery, about Li-fe battery, about Li-fe battery please inquiry battery supplier.)

4. Return to standard mode.

Product specification:

Outline Dimension:93.5*60*17mm

Measureable battery type and amout: li-polymer/Li-fe 2-6 Cell (standard voltage 7.4V-22.2V using divided voltage connector)

Receiver battery: 1.2v-8.5V DC (Not limits battery type, but need external power 7.4V-11.1v, use JST connector)

Balance voltage setting range (lower limit):2.0V-4.2V (pre-setting value 3.3v)

Discharge voltage setting range (lower limit):2.0V-4.2V (Pre-setting value 3.9V)