Currencies:


HACKER SAFE certified sites prevent over 99.9% of hacker crime.


Search:

Hobbywing Pentium 18A Brushless Speed Controller

  • Retail Price: $16.99
  • Our Promotion Price:$7.99
  • Instant Savings: $9.00 off

  • SKU: HW18A


Add to Cart: Tell a friend

Hobbywing 18A brushless Speed Controller Specification:
1.1 Output: Continuous 18A, Burst 22A up to 10 Secs.
1.2 Input Voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery
1.3 BEC: 2A / 5V (Linear mode)
1.4 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: Brushless Motor)
1.5 Size: 45mm (L) * 24mm (W) * 11mm (H)
1.6 Weight: 19g
Features:
2.1 Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
2.2 Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
2.3 Programmable Items: Brake Setting: brake enabled / brake disabled. Battery Type: Li-xx (Li-ion or LiPo) / Ni-xx (NiMh or NiCd). Low Voltage Protection Mode (Cutoff Mode): Gradually reduce the output power / Cutoff the output power. Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high. Start Mode: normal / soft / very soft. Timing: low / medium / high. Reset: reset all the programmable items to their default settings.
2.4 Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection. Advantage:
3.1 Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying.
3.2 Extreme low resistance PCB is helpful for getting a super current endurance capability.
3.3 Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.
3.4 Compatible with Hobbywing's Program Card

Customers who bought this product also purchased...

Hobbymate Rc Airplane FPV 3 axis flight Stability controller
Hobbymate Rc Airplane FPV 3 axis flight Stability controller




2013 K-Bar K8 3 Axis FBL Gyro 5.34 PRO
2013 K-Bar K8 3 Axis FBL Gyro 5.34 PRO