Currencies:


HACKER SAFE certified sites prevent over 99.9% of hacker crime.


Search:

Hobbymate Rc Airplane Power Combo Motor ESC Program Card Props P

  • Our Price: $19.00

  • SKU: HB2806COP


Add to Cart: Tell a friend

Hobbymate airplane power combo (HB2806CO) with Brushless Motor, ESC & Program Card Props, Connectors, Parts

Includes:
Hobbymate HB2806 brushless motor, 1450 Kv
Hobbywing 30A speed controller
Hobbywing program card
2x ‘O’ rubber ring
3x pairs gold plated bullet connectors
1x pair deal plug, male/female
2x 7*6 props (color may vary from picture)
1x sets motor mounting parts

Motor specification:

Kv: 1450rpm/V
Shaft Dia: ø3.00mm
Weight (about): 34g
Unload current: 0.9A (7.4)
Max current: 14.5A (7.4)
Lipo Battery: 2S-3S
Recommend Propeller: 7*6
Thrust: 530g
Install Diagram:

Hobbywing Pentium 30A ESC specification:
1.1 Output: Continuous 30A, Burst 40A up to 10 Secs
1.2 Input Voltage:  2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery
1.3 BEC:  2A / 5V (Linear mode)
1.4 Max Speed: 
210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
1.5 Size:  45mm (L) * 24mm (W) * 11mm (H)
1.6 Weight: 25g
2.1 Safety Arming Feature:
Regardless the throttle stick position, the motor will not spin after battery connected
2.2 Throttle Calibration: 
Throttle range can be configured to provide best throttle linearity,
fully compatible with all market available transmitters
2.3 Programmable Items
Brake Setting: brake enabled / brake disabled
Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd)
Low Voltage Protection Mode(Cutoff Mode):
Gradually reduce the output power / Cutoff the output power
Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high
Start Mode: normal / soft / very soft
Timing: low / medium / high
Reset:  reset  all  the programmable items to their default settings
2.4 Full Protection Features:
Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection


Hobbywing Pentium Series ESC Program Card

For hobbywing Pentium Series Speed Controller and Hobbymate Peak ESC Only***

With HOBBYWING's Program Card, you can easily set the programmable values of the brushless Electronic Speed Controller (ESC).
HOBBYWING's  Program Card has a friendly user interface. It is as small as a business card, so you can put it in your pocket when you are on field.
Note: This program card is available for HOBBYWING's Fentium , Guard, Sword series ESC.

1  Specification
1.1 Size:  92mm (L) * 52mm (W) * 6mm (H).
1.2 Weight:  26g
1.3 Input Voltage:  4.8-6V (If the ESC has not a built-in BEC, you must use an additional battery pack to supply the program card)
2 Control Panel

1 Use "up/down" button to select programmable item, use "left/right" button to select options of each item;
3.2 Use "OK" button to save the settings in the ESC.
3.3 Use "LOAD DEFAULT" button to reset each item to its default setting.

Customers who bought this product also purchased...

1 JST / JST-XH 2S Balance Wire Extension Adapter - 20CM
1 JST / JST-XH 2S Balance Wire Extension Adapter - 20CM




3.5mm gold plated connector
3.5mm gold plated connector