Hobbymate Peak 60A Elecotronic Speed Controller

1.1 Output: Continuous 60A, Burst 80A up to 10 Secs.

1.2 Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.

1.3 BEC: Pentium-60A: 3A / 5V (Switch mode)

1.4 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM,

35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)

1.5 Size: 70mm (L) * 31mm (W) * 14mm (H).

1.6 Weight: Pentium-60A: 60g

2.1 Safety Arming Feature:

Regardless the throttle stick position, the motor will not spin after battery connected

2.2 Throttle Calibration:

Throttle range can be configured to provide best throttle linearity,

fully compatible with all market available transmitters.

2.3 Programmable Items: Brake Setting: brake enabled / brake disabled

Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).

Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power /

Cutoff the output power

Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high

Start Mode: normal / soft / very soft

Timing: low / medium / high

Reset: reset  all  the programmable items to their default settings.

2.4 Full Protection Features:

Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection